Succeed Hotline:

TEL:+86-371-55912969

Home > Product > Mineral Processing Equipment >

jigging machine

 
jigging machine
 

product description

Sorting jig having a wide particle size range, large capacity, small footprint, high labor productivity, the advantages of easy operation and maintenance, it is widely used in metal mine mineral processing equipment. Jig There are many types, many specifications as roughing or selection has been widely used for sorting gold, tin, titanium, hematite, iron ore, coal and other minerals, especially manganese in the fields has been widely used.

working principle

After the ore is fed into the jig chamber, since the agitation action of the diaphragm, mineral particles in the medium were stratified according to the proportion of fine and heavy mineral particles through the gap and artificial sieve beds particles deposited on jigging ore storage hopper bucket, the upper coarse ore particles are light toward the end of the sieve medium flow discharge mouth, since after the jig chamber is lower than the position of the front jig chamber is 50mm, so the mineral particles of light through the front chamber overflows into the transom after room, again by jigging, and finally the proportion of different minerals separated, complete sorting operation.

Features

Jig is one of the modern equipment re-election, because of its large capacity, sorting a wide size range, simple operation and maintenance, as a crude election or selection is widely used for sorting gold, tin, titanium, hematite, iron ore , coal and other minerals, especially manganese in the fields has been widely used.

Technical Specifications of jig

 
model Sectional form Row Jig number Jig area(m) Stroke coefficient Stroke(mm) Red times Yield(t/h) power
2LTC366/8T Trapezoid 2 8 2.16 0.68-0.41 0-50 120-300 3-6 1.1x2
2LTC6109/8T Trapezoid 2 8 5.76 0.52-0.35 0-50 120-300 20-30 1.5x4
 
Rectangular cross-section Jig Technical Data
model Sectional form Row Jig number Jig area(m) Stroke coefficient Stroke(mm) Red times Yield(t/h) power
2LTC-912/4 rectangle 2 4 4.32 0.49 0-50 160-280 10-30 3
  
Jig stroke technical parameters
 
model Stroke coefficient stroke Jig number Feed size Capacity Consumption Red times
LTA55/2 0.5 0-25 250-350 5 1-5 4-20 1.5
LTA1010/2 0.5 0-25 250-350 5 5-25 20-60 3
LTA1515/2 0.5 0-50 200-300 10 30-50 100-140 5.5
LTA2020/2 0.5 0-50 200-300 10 40-60 160-200 7.5